Metal Gasket Face Seal Fittings
Metal gasket face seal fittings are essential components in a wide range of industries, where preventing leaks is paramount. A typical metal gasket face seal fitting assemblies consist of the glands, gasket, female nut and male nut. In addition to these parts, metal gasket face seal fitting also include body, plug, cap, flow restrictor locking device, etc.
Advantages of Metal Gasket Face Seal Fittings
A. Repeated reassembling and use
Squeezed metal gaskets do not damage the sealing surface of the gland, so they can be reassembled and used repeatedly with only one gasket change per time, resulting in low maintenance costs;
B. No dead zone, no residue and easy to purge
The structure of the metal gasket face seal fittings allows the sealing element to be completely purged by the gas, thus eliminating the risk of contamination due to residue;
C. Easy to install and disassemble
These fittings are easy to be installed and disassembled with conventional tools only, which can significantly improve the efficiency of installation and maintenance.
D. Metal-to-metal hard seal, good sealing performance
When tightening the nut, the gland at both ends will squeeze the metal gasket from both directions, and since the hardness of the gland sealing surface is higher than that of the metal gasket, the metal gasket will be slightly deformed, and a tight face seal will be formed between the gland and the metal gasket to ensure the sealing performance.
Installation Instructions
1. Assemble the gland, nut, gasket and female/male nut as below. Finger tight the nut.
2. For fittings with 316L SS and nickel gaskets, tighten the nut 1/8 turn with a wrench while holding the male nut or the fitting body steady. Tighten the nut 1/4 turn for those with copper gaskets.
Metal Gasket Face Seal Fitting for your application needs
Metal gasket face seal fittings are highly versatile, with customizable designs to suit a wide range of applications and materials. Whether you need a fitting for a high-pressure pipeline or a low-temperature storage tank, there’s a metal gasket face seal fitting that can meet your needs. KAVYA is always committed to meeting the different needs of our customers with specialized products and professional services, and continue to create values for our customers.
If you have any questions, please contact us directly and We will reach you soon.